Adam Equipment SHS Series User Manual

Shs series crane scales
Hide thumbs Also See for SHS Series:

Advertisement

Quick Links

Adam Equipment
SHS SERIES
(P.N. 7.00.6.6.0202, Revision A1 March 2012)
© Adam Equipment Company 2012

Advertisement

Table of Contents
loading

Summary of Contents for Adam Equipment SHS Series

  • Page 1 Adam Equipment SHS SERIES (P.N. 7.00.6.6.0202, Revision A1 March 2012) © Adam Equipment Company 2012...
  • Page 2: Table Of Contents

    TECHNICAL SPECIFICATIONS............3 SAFETY NOTICE ................4 KEY AND PANEL DESCRIPTION............5 DISPLAY INDICATIONS WITH LED..........5 OPERATION ..................6 SAFETY INSTRUCTIONS..............6 BATTERY OPERATION ..............7 BASIC OPERATIONS ..............8 REMOTE CONTROL UNIT ..............9 USER PARAMETERS ..............9 CALIBRATION................10 PARTS LIST..................11 WARRANTY INFORMATION ..............13 © Adam Equipment Company 2012...
  • Page 3: Introduction

    INTRODUCTION INTRODUCTION The SHS Series is a range of heavy-duty lower capacity crane scales The main features include: • Easy Operation & Rugged construction • 15mm bright red LED display enabling a good viewing angle. • 360 degree rotary safety hook and support ring design •...
  • Page 4: Technical Specifications

    TECHNICAL SPECIFICATIONS Model No. Capacity Division SHS-50 50kg 0.01kg SHS-150 150kg 0.02kg 300kg 0.05kg SHS-300 © Adam Equipment Company 2012...
  • Page 5: Safety Notice

    SAFETY NOTICE The limit stated below is the Ultimate Overload Limits of the scales. Adam Equipment Co. Ltd. Its directors, owners and affiliated companies and organisations cannot be held liable for any resulting damage or injury sustained as a result of the machines being used in excess of their stated capacities or ultimate overload limits.
  • Page 6: Key And Panel Description

    [HOLD] lock and flash. Press the [HOLD] key again to cancel the [HOLD] function. DISPLAY INDICATIONS WITH LED Kg lb N Weighing unit Indicator Low battery Indicator Hold Hold Indicator Stab Stable Indicator © Adam Equipment Company 2012...
  • Page 7: Operation

    Safety Lever returns to its resting position which prevents the sample from slipping out of the hook. • Do not exceed the maximum capacity of the Scale . • Clean and protect your scale after use. © Adam Equipment Company 2012...
  • Page 8: Battery Operation

    • If using AA or NiMH batteries the switch must be in position B • The scale will automatically power down after 30 minutes of non use to further protect the battery. • To replace the lithium battery pack please contact your dealer © Adam Equipment Company 2012...
  • Page 9: Basic Operations

    Please do not add any item that exceeds the maximum capacity of the scale. When the display shows”- - - - - ” remove the item to avoid damage to the load cell and scale. © Adam Equipment Company 2012...
  • Page 10: Remote Control Unit

    Parameter setting table. FUNCTION DESCRIPTION DEFAULT Sets buzzer 0: Disable 1: Enable Sets weighing unit on power up 0: kg 1: Lb’s 2: Newtons Sets save: 0: not saved 1: save new settings © Adam Equipment Company 2012...
  • Page 11: Calibration

    • Load this mass onto the hook and when the scale is stable press the [ZERO] key. The display shows ‘HOLD’. • After a few seconds, the calibration is complete and the scale returns to normal weighing showing the value of the calibration mass as used. © Adam Equipment Company 2012...
  • Page 12: Parts List

    SHS DISPLAY PANEL - 300kg 7.00.4.0.0094 SHS KEYBOARD PUSHBUTTON 7.00.4.0.0096 SHS 8.4 VDC @ 800ma UK CHARGER UNIT 7.00.4.0.0097 SHS 8.4 VDC @ 800ma EURO CHARGER UNIT 7.00.4.0.0099 SHS REMOTE CONTROL UNIT 7.00.3.0.0026 SHS COMPLETE PACKAGING SET © Adam Equipment Company 2012...
  • Page 13 © Adam Equipment Company 2012...
  • Page 14: Warranty Information

    WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company.
  • Page 15 Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by Adam Equipment could void the user's authority to operate the equipment WEEE COMPLIANCE...
  • Page 16 For a complete listing of all Adam products visit our website at www.adamequipment.com © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment.

This manual is also suitable for:

Shs-50Shs-150Shs-300

Table of Contents