Table Of Contents - Everlast PowerUltra 206Pi Setup And User Manual

Section.......................................................................
Letter to the Customer ...........................................
Everlast Contact Information..................................
Safety Precautions....................................................
Introduction and Specifications..............................
Unit Specifications....................................................
General Overview.....................................................
General Use and Care...............................................
Quick Setup Guide, TIG Torch/Cooler Connection
Quick Setup Guide, Plasma Connection.................
Quick Setup Guide, Stick Polarity and Connection
Quick Setup Guide, Rear Connection for Plasma...
Quick Setup Guide, Rear Connection for TIG.........
Front Panel Features and Controls..........................
Rear Panel Features and Controls...........................
Tungsten Preparation................................................
Polarity, Tungsten and Amp Recommendations....
High Frequency Start TIG Operation........................
Stick Arc Starting Procedure......................................
Plasma Function and Operation...............................
Expanded View of TIG torch....................................
Expanded View of AG60 Plasma Torch....................
7 Pin Connector Pin-out............................................
Troubleshooting..........................................................
NOTE:
Product Specifications and features are subject to change without notice. While every attempt has
been made to provide the most accurate and current information possible at the time of publication, this manu-
al is intended to be a general guide and not intended to be exhaustive in its content regarding safety, welding,
or the operation/maintenance of this unit. Everlast Power Equipment INC. does not guarantee the accuracy,
completeness, authority or authenticity of the information contained within this manual. The owner of this
product assumes all liability for its use and maintenance. Everlast Power Equipment INC. does not warrant this
product or this document for fitness for any particular purpose, for performance/accuracy or for suitability of
application. Furthermore, Everlast Power Equipment INC. does not accept liability for injury or damages, conse-
quential or incidental, resulting from the use of this product or resulting from the content found in this docu-
ment or accept claims by a third party of such liability.

Table of contents

2
Page
3
4
5
9
10
11
11
12
13
14
15
16
17
20
22
23
24
25
26
31
32
33
34