Table of Contents
Advertisement
Appendix E: Configuring
Your Web Browser
Important!
This section is for Windows computers only. If you are using a
Mac computer, your browser is already configured properly.
However, you must ensure that your computer's TCP/IP settings
are configured properly. See Macintosh TCP/IP Settings on
page 36 for instructions on how to do this.
When using a Windows computer, the software that you use to
make an Internet connection must be set for a network
connection, not a dial-up connection. This configuration should
have been done automatically when you installed the software.
If you find that you need to configure your Web browser, this
section includes instructions for recent versions of two popular
Web browsers: Internet Explorer Version 5.0 (or later) and Mozilla
Firefox 3.x. The configuration is done on the same computer on
which you installed the X4 software.
Depending on the browser you have on your Windows computer,
follow the corresponding instructions in this section.
Tip:
If you are using an earlier version of one of these browsers, the
configuration may be slightly different from below. In those
cases—or if you are using another browser altogether—configure
the browser to use a network connection (this might be called a
"Local Area Network" or "broadband" connection).
46
Advertisement
Table of Contents
