Zoom X3 User Manual page 14

Hide thumbs Also See for X3:
Table of Contents

Advertisement

both an ADSL modem and a phone or other device. You plug
the splitter into the phone jack, plug the modem into the jack
that's typically marked ADSL, and plug the phone or other
device into the jack marked PHONE. You may use the splitter
as a filter; simply leave the ADSL jack open.
B) If you want to use your modem for more than one
computer, you will want to attach the modem to a wireless
access point, switching hub, or other appropriate network
device. In that case, please go to chapter 2 now. If you only
want to use your modem with one computer, please go to
chapter 3 now.
If Your Browser Doesn't Work
Repeat steps 3–7 above and make sure that you enter the
information correctly (especially your Username and Password, if
your Encapsulation begins with PPP). If you still cannot connect,
look up your provider in the ADSL Internet Settings Tables in
Appendix A and try the setting(s) shown, if different.
If you did not connect and were using settings from the ADSL
Internet Settings Tables, return to the tables and find the next
most frequently used settings—those labeled (2) if you just entered
(1), or (3) if you just entered (2), and repeat steps 3–7 above. If
this doesn't work, please see Appendix D, Troubleshooting.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

X4

Table of Contents