Zoom X3 User Manual page 11

you a User ID or User Name, usually your email address or
the characters preceding the @ sign in your email address, and a
Password. These are NOT the User ID and Password that
you used to get into the Basic Setup menu.) Click Next three
times to reach the Summary Page of the setup.
If a 1483 Bridged IP+NAT or 1483 Routed IP connection is
detected, click Next until you reach the Summary Page of the
setup.
7
On the Summary Page, click Save/Reboot.
Congratulations! Your modem is now connected. To test your
installation, open your browser and go to a familiar Web site. If
your browser works, installation is complete for the computer you
used for setup. If your browser doesn't work, please refer to
Appendix D: Troubleshooting.
Read This Only if You Are
Manually Entering Information
Into the Basic Setup Page
1
If your service provider gave you Protocol, VPI, VCI, and
Encapsulation settings and you are choosing to manually
enter information into the Basic Setup page, do the following:
a
Leave the PVC box at PVC0.
b
If you have this information (Protocol,
Encapsulation, VPI, and VCI), select the correct
Protocol from the list. If you were not given this
information, please refer to the ADSL Internet
Settings Tables in Appendix A of this User
Manual to find Protocol, Encapsulation, VPI,
and VCI information for your provider / country.
c
Enter the Encapsulation, VPI, and VCI in the
appropriate boxes.
Chapter 3: Status Monitoring 11