Advanced Setup Options; Options - Zoom X3 User Manual

Advanced Setup Options

The options that are set by default when the X3 or X4 is
installed are sufficient for most users. However, those that want
or need to change the X3 or X4's settings can do so using the
Advanced Setup page. This chapter explains how to specify
advanced options.
The information in this chapter applies to you if:
•
Your Internet service provider instructs you to enable,
disable, or change the default settings for your X3 or X4 in
order for it to work properly with your ADSL service. See
How To Use the Advanced Options on page 19 for a table
listing the Advanced Setup areas that you can customize.
•
You need to change your Wide Area Network settings. See
Changing Your WAN Settings on page 21 for more
information.
•
You want to add, remove, or change the IP Filters. See
Using IP Filters on page 22 for more information.
If none of these items applies to you, you should continue with
chapter 5, Management and Diagnostics.
How To Use the Advanced

Options

Configuring the X3 or X4 for the situations described at the
beginning of this chapter requires the use of the Advanced Setup
page. To access this page, click on the Advanced Setup link on the
Chapter 4: Advanced Setup Options
4
19