Appendix B: Top And Backp; Anels; Panel - Zoom X3 User Manual

Appendix B: Top and
Back Panels
The following table describes each light on the top panel.
Light Description
Power Lights when the X3 or X4 is plugged into a power source.
ADSL
Blinks when the X3 or X4 is performing its startup
sequence. Stays on solid when the unit has synched up
with its ADSL connection.
Note: If the light fails to switch from blinking to steady after
a minute or two, check with your ADSL provider that the
ADSL connection is activated, or refer to Appendix D:
Troubleshooting.
Data
Blinks when data is sent and received.
Ethernet Lights when the Ethernet port of the X3 or X4 is plugged
into the Ethernet port of a powered-up device. Blinks when
there is data activity.
The following table describes each item on the back panel.
Port Description
Line Jack to connect the modem to the ADSL telephone wall
jack.
Ethernet LAN port that can connect the unit to an access point, a
network hub, or the Ethernet port of a computer.
RESET Button to reset the modem to its system default settings
(necessary if communication link is lost).
USB Port that can connect the modem to a USB port of a
Windows computer.
Power
Port to connect the unit to the X3 or X4's power cube.
Appendix B: Top and Back Panels 35