Table of Contents
Advertisement
Thank you for selecting the ZOOM G1N/G1XN (hereafter simply called the
"G1N/G1XN").
Please take the time to read this manual carefully to get the most out of the
unit and to ensure optimum performance and reliability.
Keep this manual at hand for future reference.
SAFETY PRECAUTIONS / Usage Precautions · · · · · 2
Terms Used in This Manual · · · · · · · · · · · · · · · · · · 3
Selecting a Patch for Playing · · · · · · · · · · · · · · · · · 8
Using the Tuner · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Using the Rhythm Function · · · · · · · · · · · · · · · · · 12
Editing a Patch · · · · · · · · · · · · · · · · · · · · · · · · · · · 14
Storing/Copying Patches · · · · · · · · · · · · · · · · · · · 16
Restoring Factory Defaults · · · · · · · · · · · · · · · · ·17
Changing the Way Patches Are Called Up · · · · · · 18
(G1N only) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18
Using a foot switch · · · · · · · · · · · · · · · · · · · · · · ·18
Using an expression pedal · · · · · · · · · · · · · · · · · ·19
© ZOOM Corporation
Operation Manual
Contents
Reproduction of this manual, in whole or in part,
by any means, is prohibited.
[PEDAL ASSIGN] key operation · · · · · · · · · · · · · ·20
Adjusting the expression pedal · · · · · · · · · · · · · ·20
Effect Types and Parameters · · · · · · · · · · · · · · · · 21
Explanation of symbols · · · · · · · · · · · · · · · · · · · ·21
PATCH LEVEL · · · · · · · · · · · · · · · · · · · · · · · · · ·21
COMP/EFX module · · · · · · · · · · · · · · · · · · · · ·21
DRIVE module · · · · · · · · · · · · · · · · · · · · · · · · ·22
EQ module · · · · · · · · · · · · · · · · · · · · · · · · · · · ·23
ZNR/AMP module · · · · · · · · · · · · · · · · · · · · · ·23
MODULATION module · · · · · · · · · · · · · · · · · ·24
DELAY module · · · · · · · · · · · · · · · · · · · · · · · · ·25
REVERB module · · · · · · · · · · · · · · · · · · · · · · ·26
Rhythm Function Preset Patterns · · · · · · · · · · · ·26
Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27
Troubleshooting · · · · · · · · · · · · · · · · · · · · · · · · · · 27
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zoom G1N
Summary of Contents for Zoom G1N
-
Page 1: Table Of Contents
(G1N only) · · · · · · · · · · · · · · · · · · ·... -
Page 2: Safety Precautions / Usage Precautions
Please keep this manual in a convenient place for future reference. Terms Used in This Manual This section explains some important terms that are used throughout the G1N/G1XN manual. COMP/EFX DRIVE Compressor FD COMBO... -
Page 3: Controls And Functions / Connections (G1N)
Guitar cable plug into this jack will turn the unit on. When operating the G1N on batteries, it is advisable to disconnect the guitar cable plug from the [INPUT] jack when not using the unit, to conserve battery power. -
Page 4: Controls And Functions / Connections (G1Xn)
These switches are used for selecting patches, controlling the tuner, and other functions. [DC IN] jack An AC adapter (ZOOM AD-0006) with a rated output of 9 volts DC, 300 mA (center minus plug) can be plugged into this jack. -
Page 5: Selecting A Patch For Playing
Directly switch a bank Press the [BANK UP·TAP] key. Repeatedly pressing the key cycles through banks in the order A ... d, 0 ... 3, A. With the G1N, using the foot switch (FS01) to switch HINT banks is also possible ( g p. 18). Adjust the master level Operate the [VALUE] knob. -
Page 6: Using The Tuner
Using the Tuner To use the tuner function of the G1N/G1XN, the built-in effects must be bypassed (temporarily turned off) or muted (original sound and effect sound turned off). Switch to bypass or mute • Setting the G1N/G1XN to the bypass condition In play mode or rhythm mode ( g p. 12), press both ] foot switches together. When the... -
Page 7: Using The Rhythm Function
200 and above, dots are shown in the center and in the bottom right corner. With the G1N, using a separately available foot switch HINT to manually adjust the tempo is also possible ( g p. 18). -
Page 8: Editing A Patch
Editing a Patch (Edit Mode) The patches of the G1N/G1XN can be freely edited by changing the effect type used by the various modules and by changing the parameter settings. Try editing the currently selected patch to create your own sound. -
Page 9: Storing/Copying Patches
Even after overwriting user patches with other patches, their original content can be restored in a single operation ("All Initialize" function). To do this, turn power to the G1N/G1XN on while holding down the [STORE] key. The indication "AL" appears on the display. ZOOM G1N/G1XN... -
Page 10: Changing The Way Patches Are Called Up
Changing the Way Patches Are Called Up This section describes how to change the patch selection method of the G1N/G1XN to "pre- select". In this mode, you first select the patch to use next, and then perform an additional step to activate the patch. -
Page 11: Using The Built-In Expression Pedal (G1Xn Only)
Besides the method described above, you HINT can also select the module to control by holding down the [RHYTHM] key and turning the [VALUE] knob. This is the same as for the G1N. (For details, see page 19.) Push strongly, so that pedal touches 2. Store the patch as required. -
Page 12: Drive Module
(160 Hz) boost/cut. (800 Hz) boost/cut. ZNR/AMP (Type&Prm) This module combines ZOOM's proprietary ZNR (removes noise during play pauses without affecting sound quality) with an amp simulator (recreates the sound of various speaker cabinets). Type and parameters are adjusted at the same time. ZNR (ZOOM Noise Reduction) This is the noise reduction function only. Higher settings result in a stronger effect. Set the value as high as... -
Page 13: Modulation Module
Specifies the tonic for the scale used for pitch shifting. The "o" symbol stands for #. Rate Adjusts the modulation rate. ZOOM G1N/G1XN Pitch Bend This effect allows using the expression pedal to change the pitch in real time. Right-digit settings select the pitch change type caused by the expression pedal (see Table 1). -
Page 14: Reverb Module
Stop the rhythm pattern METRO 5 first ( g p. 12). METRO • Patch switching does not change the sound Is the patch selection method of the G1N/G1XN set to "pre-select" ( g p. 18)? Turn power off and ZOOM G1N/G1XN ZOOM G1N/G1XN Specifications max. - Page 15 • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For EU Countries Declaration of Conformity: This product complies with the requirements of EMC Directive 2004/108/EG and Low Voltage Directive 2006/95/EC ZOOM CORPORATION 4-4-3, Kandasurugadai, Chiyoda-ku, Tokyo 101-0062, Japan Web Site: http://www.zoom.co.jp G1N/G1XN - 5000-1...
Need help?
Do you have a question about the G1N and is the answer not in the manual?
Questions and answers