Removing The Rear Wheel; Verification Of Rear Wheel; Checking The Rear Wheel; Check And Replace The Rear Wheel Gear - Yamaha FZ-16 Service Manual

REMOVING THE REAR WHEEL

(DRUM)
1.
Place the vehicle on a flat surface.
WARNING
Support the vehicle with safety to
there is no risk of falling.
NOTE:
Place the vehicle on a suitable support,
so that the front wheel is lifted.
2.
Remove:
Adjusting nut brake rod "1"
Brake rod "2"
Spring "3"
Pin "4"
NOTE:
Press down the brake pedal to
remove the pin from the brake rod.
3.
Remove:
Rear Wheel
NOTE:
Push the rear wheel forward and remove the
transmission chain wheel sprocket
rear.
VERIFICATION REAR WHEEL
1. Check:
Wheel axle
Rear Wheel
Wheel bearings
Oil Seals
Refer to "CHECKING
FRONT WHEEL "on page 4-8
2. Check:
Rim
Rear Wheel
Damage / wear Replace.
See "VERIFICATION
TIRES "on page 3-19 and" CHECKING
TIRE "on page 3-20
3. Measure:
Radial deviation of the wheel
Lateral deviation of the wheel
Refer to "CHECKING
FRONT WHEEL "on page 4-8

CHECKING THE REAR WHEEL

1. Check:
Cube rear wheel traction
Cracks / damage Replace.
Bucket cushions traction
rear wheel
Damage / wear Replace.
CHECK AND REPLACE THE WHEEL
REAR WHEEL GEAR
1. Check:
Sprocket rear wheel
More than 1/4 of tooth wear Replace
the whole chain transmission sprocket
motor and the sprocket of the rear wheel.
DobladosReemplace teeth throughout the
transmission chain, sprocket, and larueda
rear wheel sprocket.
Correct
b.
1. Transmission roller chain
Sprocket rear wheel
2.
2. Replace:
Sprocket rear wheel
a.
Remove the anti-lock nuts of the
sprocket of the rear wheel.
b.
Clean the bucket
back with a clean cloth, wipe on
all surfaces in contact
with the sprocket of the rear wheel.
c.
Join a new cog in the
rear wheel.
Nuts sprocket
rear wheel
43 Nm (4.3 m · kg, 31 ft · lb)
T.
R.
4-14
REAR WHEEL
Wheel drive