Assembly Of The Front Fork Bars - Yamaha FZ-16 Service Manual

13.
Assembly:
• O-ring
New
(In the screw cap of the front fork)
• Screw the top of the front fork
• Clip New
BLACK:
•
Before installing the screw cap of the fork
front, lubricate the O-ring grease.
•
Before installing the screw cap of the fork
front, lubricate the O-ring grease.
ASSEMBLY OF THE BARS
FRONT FORK
The following procedure applies to both
Front fork bars
1.
Assembly:
•
Delanter fork legs
Temporarily tighten the screws
upper and lower supports
2.
Press:
•
Screw top bracket "1"
Screw the top bracket
25 Nm (2.5 m · kg, 18 ft · lb)
T.
R.
•
Screw bottom bracket "2"
Screw bottom bracket
25 Nm (2.5 m · kg, 18 ft · lb)
T.
R.
NOTE:
•
To give the proper torque to the screws
top, first place, tighten the screw on
bottom, then tighten the cap before
tighten the screw on top.
FRONT FORK
WARNING
Make sure the brake hose, cable
clutch, and the cables are guided
correctly.
1
4-42
2