Yamaha FZ-16 Service Manual page 49

1. Left handlebar switches
2. Clutch switch wire
3. Clutch cable
4. Cable left handlebar switch
5. Booster Cable
6. Main switch lead
7. Handlebar switch lead right
8. Brake Hose
9. Cable front brake switch
10. Throttle cable
11. Handlebar switches right
12. Cable left rear turn signal
13. Turn Signal Relay
14. Cable from the backlight unit
15. Lead right rear turn signal
16. Cover the seat lock
17. Cable lock the seat
18. Relay circuit court of the boot
19. CDI
20. Carburetor vent hose
21. Rear fender
22. Rear fender cover
A. Insert the breather hose into the hole carburetor air filter
B. Attach cables handlebar switches and the clutch clamp
handlebar
C. Attach cables and switches front brake handlebar clamp
handlebar
D. Pass the tail light wires through the hole of the rear fender
E. Set the high voltage cable and vent hose clamp with 1
F. Attach the clutch cable and hose vacuum detection with 1 bracket
GUIDING CABLES
2-32