Special Tools - Yamaha FZ-16 Service Manual

SPECIAL TOOLS

Special tools shown below, are required for assembly and adjustment
precise. Use only the appropriate special tools, which will help to prevent damage
by the use of inappropriate tools or improvised techniques.
Tool name /
Tool No.
Tappet screw holder
YSST-706
This tool is used to hold the screw taque
to adjust the valve clearance
Tappet adjusting wrench
YSST-806A
This tool is used to loosen and tighten the nut
the tappet
Thickness gauges
YSST-815
This tool is used to adjust the valve clearance
a motor
Adjuster rear shock
YSST-821
This tool is used for adjusting the preload
Rear shock
Magnet Holder
YSST-601B
This tool is used to hold the magnet to
removing or installing the magneto securing nut and nut
main gear
Magneto Puller
YSST-628
This tool is used to remove the magnet with the
help of the magnet holder
SPECIAL TOOLS
Illustration
1-6