Front Brake Master Cylinder Disassembly; Check The Front Brake Master Cylinder; Front Brake Master Cylinder Assembly - Yamaha FZ-16 Service Manual

7.
7. Check:
Operation of the brake lever
Soft or spongy feeling Bleed
Brake system
See "PURGING THE SYSTEM
HYDRAULIC BRAKE "on page 3-15.
MASTER CYLINDER DISASSEMBLY
FRONT BRAKE
NOTE:
Before disassembling the master cylinder
front brake, drain the brake fluid
the entire brake system
1.
Disconnect:
Brake light switch front "1"
NOTE:
Press the latch to remove the light switch
Front brake master cylinder brake.
2.
Remove:
Screw connection brake hose
Copper washers
Brake Hose
NOTE:
To collect the remaining brake fluid,
place a container under the master cylinder
and end of the brake hose.
Max.
Min
4-23
FRONT BRAKE
CHECK THE MASTER CYLINDER
FRONT BRAKE
1.
Check:
Brake master cylinder "1"
Damage / scratches / wear Replace.
Liquid distribution passages brake "2"
(Body of the brake caliper)
Blow with compressed air clogged.
2
2.
Check:
Kit brake master cylinder
Damage / scratches / wear Replace.
3.
Check:
Deposit brake master cylinder
Damage / scratches / wear Replace.
Diaphragm brake master cylinder
Damage / wear Replace.
4.
Check:
Brake Hose
Cracks / damage / wear Replace.
MASTER CYLINDER ASSEMBLY
FRONT BRAKE
WARNING
Before assembly, all components
internal brake must be cleaned and lubricated
with a cleaner or new brake fluid.
Never use solvents on the components
internal brake.
Recommended Liquid
DOT 3 or DOT 4
MASTER CYLINDER ASSEMBLY
FRONT BRAKE
1.
Assembly:
Brake master cylinder "1"
Clamp the brake master cylinder "2"
Screw clamp
Brake master cylinder
10 Nm (1.0 m · kg, 7 ft · lb)
T.
R.
1