MAGNET REMOVAL
1.
Remove:
•
Magneto rotor nut
•
Washer
NOTE:
•
While holding the rotor magnet using
the rotor magnet holder "1", loosen the
magneto rotor nut.
1
Magnet holder
YSST-601B
2.
Remove:
•
Magnet rotor "1"
(With the extractor magnet "2")
•
Woodruff key
CAUTION
To protect the end of the crankshaft, place
a key of suitable size between the extractor
magnet and the crankshaft.
NOTE:
Make sure the exhaust is magneto
centered over the rotor magnet.
Magneto Puller
YSST-628
MAGNETO AND STARTER CLUTCH
2
REMOVING THE STARTER CLUTCH
1.
Remove:
•
Starter clutch bolts "1"
NOTE:
•
While holding the rotor magnet with
magnet holder, remove the screws
starter clutch "1"
CHECKING THE STARTER CLUTCH
1.
Check:
•
The starter clutch rollers "1"
•
Covers engine clutch spring
boot "2"
•
Spring clutch motor
start "3"
Damage / wear Replace the clutch
boot.
5-28
1
1