Removing The Front Brake Caliper; Disassembly Of The Brake Caliper; Checking The Brake Caliper - Yamaha FZ-16 Service Manual

REMOVING THE BRAKE CALIPER
FRONT
NOTE:
Before disassembling the brake caliper, drain
all the brake fluid brake system.
1.
Disassembly:
Screw connection brake hose
Copper washers
Brake Hose
NOTE:
Place the end of the brake hose
container and pump out fluid
Brake carefully.

DISASSEMBLY OF THE BRAKE CALIPER

1.
Disassembly:
Piston brake caliper "1"
Seals piston caliper "2"
Dust Seals Caliper "3"
1
2
a.
Apply compressed air through the opening "a"
the union of the brake hose to force
the output of the pistons of the brake caliper.
WARNING
Cover the piston brake caliper with a
cloth.
Be careful to avoid damage when the
piston is expelled from the brake caliper.
Never attempt to remove the caliper pistons
pushing the brake.
to
1
2
3
FRONT BRAKE
b.
Disassemble the seals and dust covers
the brake caliper

CHECKING THE BRAKE CALIPER

Replacement recommended plan
brake components
Brake pads
Piston seals
Dust
Brake Hose
Brake fluid
1. Check:
Piston brake caliper "1"
Roughness / scratches / wear Replace
the pistons of the brake caliper.
Cylinders of the brake caliper "2"
Scratches / wear Replace the gripper
Brake
Body of the caliper "3"
Cracks / damage Replace the clamp
brake.
Distribution passages brake fluid
(Body of the brake caliper)
Blow with compressed air clogged.
WARNING
Whenever the brake caliper is disassembled,
replace the piston seals and dust
2
2. Check:
Support the brake caliper
Cracks / damage Replace.
4-21
If required
Every two years
Every two years
Every four years
Every two years and always
that the brake is
disassembly
3
2
1