Table of Contents
Advertisement
E.1 Setup Menu
The login level screen shows the buttons of the login level. All login levels except the level
User are password protected.
The button Launch Scan Application starts the Scan2Net scan application.
The button Back returns to the former screen.
E.1.1
Selecting the Login Level
User
This level allows the user to get some status information from the scanner.
These are e.g. the firmware version, the remaining lamp operating time,
system information, and many more. Furthermore it allows setting a few
basic parameters.
Poweruser
Password protected level. This level allows setting an extended range of
system parameters and to execute some adjustments. It includes all
parameters of the User level.
Admin
Password protected level. This level allows setting all system parameters
and to configure the scanner in detail.
Access to the Admin level is limited for trained technicians. It includes all
parameters of the User level and the Poweruser level.
For the steps described here, choose the login level Poweruser .
Enter as user name and password: Poweruser
Consider the case sensitivity of user name and password.
Click the button Apply to finish the entry.
Setup Manual
Picture 48: Login level screen
Page 55
Advertisement
Table of Contents
Need help?
Do you have a question about the Wide Tek WT 36C and is the answer not in the manual?