Elcometer 406L Operating Instructions Manual page 8

R
2.2 SWITCHING ON/OFF
To switch on, press
It is not possible to switch off the Elcometer 406L manually. The unit will
automatically switch off XX seconds after the last key press, where XX is user-defined between 30 and 120
seconds (see "Changing settings using Novo-Soft™" on page 21).
2.3 CHANGING DISPLAY LANGUAGE
The Elcometer 406L can display menus in the following languages; English, French, Spanish, German,
Italian and Dutch.
To select language using the keypad, see "Language - Selecting" on page 19.
Display language can also be changed by the Novo-Soft™ package included with your gauge.
1. Install and run Novo-Soft™ package. See "Novo-Soft™ software" on page 19.
2. Connect Elcometer 406L to PC and switch gauge on. See "Interfacing to your PC" on page 20.
3. Select required display language. See "Changing settings using Novo-Soft™" on page 21.
6
. The display will show:
Last Certified:
24/10/2006