Viewing Measurement Statistics - Elcometer 406L Operating Instructions Manual

3. Press the READ/SELECT key to confirm. The LAST reading will be deleted and the gauge will prompt
for further deletions. If necessary, continue to delete further readings by pressing the READ/SELECT
key.
4. To delete all ALL readings for the displayed angle, press and hold READ/SELECT key
5. When you have finished deleting, press the C key to return to the measurement screen.

5 VIEWING MEASUREMENT STATISTICS

Your gauge calculates a statistical
To view the statistics:
1. While the gauge is in measurement mode, press the SCROLL UP
key to display the angle, minimum (MIN) and maximum (MAX)
values for the stored data.
2. Press the READ/SELECT key to display the other statistical values
for the data; the mean (MEAN), the Coefficient of Variation (CV) and
the Standard Deviation (SD).
3. To return to measurement mode after viewing statistics, press the
SCROLL DOWN key once.
b. Stored data can also be cleared from the gauge using the Delete Data function in Novo-Soft
connected to the PC. See see "Novo-Soft™ software" on page 19.
c. An explanation of the statistical analysis is given in "Statistics terminology" on page 23.
c
analysis of readings as they are taken.
b
.
STATS MIN MAX
60° 88.1 88.2
MEAN CV SD
88.1 0.12 0.87
TM
when the gauge is
R
13