Table of Contents
Advertisement
8.4 SAMPLE DATA
To enable you to test some of the features of Novo-Soft before downloading any real data, files containing
sample data are installed with the software.
To access the data, click on 'Load' and look for the '.res' files in the directories labelled '20degree',
'60degree', etc.
8.5 UPLOADING AND ANALYSING READINGS
For instructions on how to upload and analyse data from the gauge, click on the HELP icon in Novo-Soft™.
8.6 CHANGING SETTINGS USING NOVO-SOFT™
Certain gauge operating setting can be altered using the Novo-Soft software when the gauge is connected
to the PC.
From the Novo-Soft main screen, click on 'Set Up' and select 'Software Preferences'. The settings that can
be altered are: Language; Stored calibration values; Choice of Automatic or Manual Calibration; Automatic
switch off delay time; Read on time
e.
When the 'Read on time' option is ticked the gauge will go into 'Move-and-read' mode for 30 seconds whenever the
READ/SELECT key is pressed.
e
.
R
21
Hide quick links:
Advertisement
Table of Contents
