Installing The Switch By Using Front Mounting Brackets And Slide Rails - HP 830 Installation Manual

Wear an ESD-preventive wrist strap, and verify that the rack is sturdy and properly grounded.
1.
Use the screws packed with the front mounting brackets to attach the front mounting brackets to
2.
both sides of the switch. See
Install the rack shelf on the rack. (See
3.
from the actual installation on your rack.)
Figure 15 Installing a rack shelf
Place the switch horizontally on the rack shelf, push it into the rack along the rack shelf, and secure
4.
the front mounting brackets onto the front square-holed brackets of the rack by using the screws
and cage nuts. See
Figure 16 Installing the switch using front mounting brackets and a rack shelf
(1) Front mounting bracket
Installing the switch by using front mounting brackets and slide
rails
Wear an ESD-preventive wrist strap, and verify that the rack is sturdy and properly grounded.
1.
Use the screws packed with the front mounting brackets to attach the front mounting brackets to
2.
both sides of the switch. See
Attach the slide rails to both sides of the rack with M5 self-tapping screws. (See
3.
figure is for reference only and may differ from the actual installation on your rack and slide rails.)
Figure 9.
Figure
Figure 16.
Figure 9.
15
15. This figure is for reference only and may differ
(2) Front square-holed bracket
Figure 17. This