HP 830 Installation Manual page 17

Figure 11 Installing rear mounting brackets
(1) Rear square-holed brackets
Hold the bottom of the switch with one hand and the front part with the other hand, and gently push
6.
the switch into the rack. See
Figure 12 Installing the switch by using front and rear mounting brackets
1
2
(1) Screw for fixing the front mounting bracket
(3) Front square-holed bracket
(5) Rear mounting bracket
(7) Rear square-holed bracket
CAUTION:
After pushing the switch into the rack, make sure the upper edges of the rear mounting brackets fixed on
the rack have close contact with the weight-bearing screws on the switch. See
1
(2) Rear mounting bracket
Figure 12.
3
4
(2) Front mounting bracket
(4) Weight-bearing screw
(6) Screw for fixing the rear mounting bracket
13
2
6
5
7
Figure 13.