HP 830 Installation Manual page 33

*
*
*
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B at the prompt within 4 seconds to access the Boot menu, or wait for the system to
automatically start up. To access the BootWare menu after the system software image files are
decompressed, you must restart the switch.
Starting to get the main application file--flash:/main.bin!............................
............................................
The main application file is self-decompressing ........................................
.....................................................................................
...
.....................................................................................
...
.........Done!
System application is starting...
User interface con0 is available.
Press ENTER to get started.
Press Enter at the prompt, and you can configure the switch when the prompt <HP> appears.
During the startup process, the CPLD is automatically upgraded to the latest version, if any.
After the upgrade process, the system will display this message: "The board cpld update successfully,
please repower device." At this prompt, power off and restart the switch so that the new CPLD version
takes effect.
HP 830 BootWare, Version 2.00
: Jan 8 2013
: XLS208
: 32KB
: 750MHz
: DDR2 SDRAM
: 512MB
: 533MHz
: 768KB
: 1024MB
: 006
: Ver.A
29
*
*
*