HP 830 Installation Manual page 26

Emulation—VT100
•
To set terminal parameters, for example, on a Windows XP HyperTerminal:
Select Start > All Programs > Accessories > Communications > HyperTerminal.
1.
The Connection Description dialog box appears.
Enter the name of the new connection in the Name field, and click OK.
2.
Figure 24 Connection description
Select the serial port to be used from the Connect using list, and click OK.
3.
Figure 25 Setting the serial port used by the HyperTerminal connection
Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
4.
and click OK.
22