Appendix C Slot arrangement
The HP 830 24-port PoE+ unified wired-WLAN switch provides slots for uplink modules. On the switch,
all fixed ports are located in slot 0.
Figure 38 Slot arrangement for the switch
The switch provides 30 fixed ports numbered GigabitEthernet 1/0/1 through GigabitEthernet 1/0/30,
among which:
•
GigabitEthernet 1/0/1 through GigabitEthernet 1/0/24 are 10/100/1000 Base-T Ethernet ports,
with the last part of the port numbers indicated on the front panel.
GigabitEthernet 1/0/25 through GigabitEthernet 1/0/28 are 1000Base-X SFP fiber ports, with
•
the last part of the port numbers indicated on the front panel.
GigabitEthernet 1/0/29 and GigabitEthernet 1/0/30 are internal ports for connecting the
•
controller engine.
The switch provides two 10 GE interface module slots. The ports on the interface modules installed in
these slots are numbered TenGigabitEthernet 1/1/1 and TenGigabitEthernet 1/2/1.
46