Displaying Operational Statistics For The Switch - HP 830 Installation Manual

<HP>display version
HP Comware Platform Software
Comware Software, Version 5.20, Release 3308P16
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP 830 24P LSW uptime is 0 week, 0 day, 0 hour, 56 minutes
HP 830 24P LSW
128M
256M
Config Register points to Nand Flash
Hardware Version is VER.A
CPLD Version is 006
Bootrom Version is
[SubSlot 0] 24GE+4SFP+POE Hardware Version is VER.A
[SubSlot 1] 1XFP Hardware Version is VER.B

Displaying operational statistics for the switch

When you perform routine maintenance or the system fails, you might need to display the operational
information of each feature module to locate failures. Typically, you need to run the display commands
individually. However, you can use the display diagnostic-information command in any view to display
or save the operational statistics of multiple feature modules of the switch. This command displays the
output of the display clock, display version, display device, and display current-configuration
commands.
Save the operational statistics for each feature module of the switch:
•
<HP>display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save successfully.
Execute the more default.diag command in user view, and then press the Page Up and Page Down
keys to view the contents of the file default.diag.
Display the operational statistics for each feature module of the switch. (Details not shown.)
•
<HP>display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================================
===============running CPU usage information===============
=================================================================
===== Current CPU usage info =====
CPU Usage Stat. Cycle: 49 (Second)
CPU Usage
CPU Usage Stat. Time : 2013-01-27
CPU Usage Stat. Tick : 0x8(CPU Tick High) 0x60a1ca46(CPU Tick Low)
Actual Stat. Cycle
bytes DRAM
bytes Nand Flash Memory
2.00
: 2%
: 0x0(CPU Tick High) 0xc3736b09(CPU Tick Low)
18:19:06
33