Gbic Module Leds - Allied Telesis AT-8024 Installation Manual

Product Description
GBIC Module
LEDs
LED
LINK
Mode - COL
Mode - 100
Mode - FULL
Mode - ACT
20
Next to each GBIC slot are two LEDs. The LEDs display the operating
status of a GBIC module. Use the Mode Select Button to toggle the status
information displayed by a GBIC Mode LED. The LEDs are defined in
Table 3.
Table 3 GBIC LEDs
State Description
OFF Indicates that there is no link between the GBIC
port and the end node.
Steady Green Indicates a valid link has been established
between the GBIC port and the end node.
OFF Indicates that no data collisions are occurring on
the port.
Flashing Green Indicates that data collisions are occurring on the
port.
Steady Green Indicates that the port is operating at 1000 Mbps.
Solid Green Indicates that the port is operating in full-duplex
mode.
OFF Indicates that there is no activity on the port.
Flashing Green Indicates that the port is transmitting and/or
receiving data packets.