Download Print this page
Allied Telesis AT-8000S/48POE Datasheet
Allied Telesis AT-8000S/48POE Datasheet

Allied Telesis AT-8000S/48POE Datasheet

Layer 2 stackable fast ethernet switch

Advertisement

Quick Links

Datasheet |
Switches
AT -8000S/48POE
Layer 2 Stackable Fast Ethernet Switch
AT -8000S/48POE
48 port stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
ports (RJ-45)
Overview
One of a series of stackable switches from
Allied Telesis, the AT-8000S/48POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP phones and
wireless access points.This switch offers 48
10/100 ports, two fixed SFP combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth.The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
Combined Ethernet and Power
Delivery for Branch Office and
Wiring Closet Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices.The state-of-the-art
QoS capability of this product ensures reliable
delivery of advanced network services such as
voice while effectively controlling the continually
increasing traffic needs found in today's networks.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis' intuitive yet fully featured Web interface
the advanced features of the AT-8000S/48POE
are accessible to a wide range of system
administrators.The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Allied Telesis
Secure Management
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a pre-
determined part of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network data.
Gigabit and Fast Ethernet SFP
Support
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs).This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased-in over time.The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
Key Features
Easy,Well Known Management
Industry standard CLI
Simple intuitive, fully featured Allied Telesis
Web Interface
Secure encrypted Web and CLI management
with SSHv2 and SSL
SNMP
Two level access privileges
Power over Ethernet
Provides standards based IEEE 802.3af
Power over Ethernet to all 48 10/100 ports
Support for up to 48 class 2 powered
devices at 7.3 watts
Support for up to 24 class 3 powered
devices at 15.4 watts
Affordable Truly Stackable 10/100 Switching
Platform
Single IP address stack management.
4G resilient ring stacking architecture
Across stack link aggregation
Across stack VLAN configuration
Across stack port mirroring
Redundant standby stack master
All the QoS Needed in the Wiring Closet for
Today's Voice and Data Networking
Eight priorities assigned to four queues
IEEE 802.1p for Layer 2 QoS
DSCP (DiffServ) for Layer 3 QoS
IEEE 802.1p to DSCP remarking traffic ready
for transport to the Layer 3 core of the
network
Layer 2 and Layer 3 ACL
Securing the Network at its Most Vulnerable
Point
IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
Guest VLAN: to ensure visitors or unauthorized
users connect only to services defined by IT
e.g. Internet
TACACS+: for ease of management security
administration
Layer 2 and Layer 3 ACL
Port MAC address security options
www.alliedtelesis.com

Advertisement

loading

Summary of Contents for Allied Telesis AT-8000S/48POE

  • Page 1 Layer 2 and Layer 3 ACL Featuring an industry standard CLI and Allied Telesis’ intuitive yet fully featured Web interface Securing the Network at its Most Vulnerable the advanced features of the AT-8000S/48POE Point are accessible to a wide range of system •...
  • Page 2: System Configuration

    IEEE 802.1x port-based network IEEE 802.3 IPv6 Applications: WEB/SSL Telnet access control IEEE 802.3u 100TX and 100FX server/SSH, AAA/Radius, Management MAC-based network access control IEEE 802.3z 1000SX ACLs, SNTP, PING, TFTP/Copy, Syslog ACL - Access Control Lists IEEE 802.3ab 1000T Allied Telesis www.alliedtelesis.com...
  • Page 3: Ordering Information

    © 2009 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000181 Rev.M...