Kingston Technology KTM609 Installation Manual page 23

18
3. Press [F2] (Function Key F2) to copy the EMS driver from the Kingston
Option Diskette onto the boot disk.
4. When the next screen appears, press [F1] if your computer boots from a floppy
diskette in drive A, or press [F2] if your computer boots from the internal hard
disk, drive C. Then press [Enter] to continue.
(C) Copyright 1990, Kingston Technology Corporation
Install EMS Driver onto a New Drive and Configure
F1 Drive A: if system is booted up from floppy diskette
F2 Drive C: if system is booted up from hard disk
5. Next, the INSTALL program asks for the pathname of the subdirectory where
you want to store the EMS driver. For example, to store the EMS driver under
ABC on your hard disk, type:
C:\ABC [Enter]
Press any key to continue.
(C) Copyright 1990, Kingston Technology Corporation
Install EMS Driver onto a New Drive and Configure
F1 Drive A: if system is booted up from floppy diskette
F2 Drive C: if system is booted up from hard disk
Kingston Technology Corporation
INSTALLATION Version 1.0
INSTALLATION Version 1.0
Path [C:\ABC
KTM-609/16 Installation Guide - Rev. D1
Installing the Kingston EMS Driver
]