Software Installation; Installation Overview; Updating Your Backup Copy Of The Reference Diskette - Kingston Technology KTM609 Installation Manual

6

Software Installation

Installation Overview

Here is a quick look at the steps you will need to take to install the KTM-609/16
board:
• Check the contents of the KTM-609/16 package.
• Running INSTALL to copy files to your backup Reference diskette.
• Install SIMMs on the KTM-609/16 board.
• Install the KTM-609 board in your PS/2.
• Configure the board and allocate memory.
- If your operating system is Windows or OS/2, or if all new memory was
allocated as Extended, you're finished. STOP HERE.
- If all or part of new memory was allocated as Expanded, install the Kingston
EMS driver. Now you're finished. STOP HERE.

Updating Your Backup Copy of the Reference Diskette

It is recommended that you never use your original IBM
installing hardware. If you do not have a backup copy disk, follow the instructions
below to make a backup copy of your IBM Reference Diskette:
1. Boot from your most current Reference diskette.
2. From the Main Menu, select "Backup the Reference Diskette."
3. Follow the instructions until the process has completed.
The KTM-609/16 package includes a Kingston Option Diskette.
contains configuration files which enable your system to recognize the KTM-609/16.
There is an installation program on the Kingston diskette. Use this program to copy
the Kingston option files to your backup IBM Reference diskette.
Kingston Technology Corporation
Software Installation
® Reference diskette when
KTM-609/16 Installation Guide - Rev. D1
This diskette