Level Service Manual
Removal & Replacing the Flip Board Assembly & Display
G
6809513A81-A
1.
Remove the battery cover, battery, SIM, rear housing, transceiver board, front housing,
flip housing as described in the procedures.
2.
Using a tweezer, gently pushing outwards to release the 4 display bracket catches shown
below.
2 catches on each side of the flip front housing
Figure 14. Disengaging the Display Bracket Assembly Catches
3.
Carefully lift the display bracket away from the flip assembly.
Figure 15. Removing the Display Bracket Assembly
The flexible printed cable (FPC)(flex) is easily damaged. Exercise extreme care when
handling.
April 01, 2008
Disassembly
Display bracket stopper
29