Disassembly
Removing and Replacing the Main Lens
26
1.
Remove the battery cover, battery, SIM, rear housing, transceiver board, front housing as
described in the procedures.
2.
Using the disassembly tool, insert the tool under the display lens at the top of the flip. Slide
the tool around the edges of the display lens to remove the lens. Remove any left over
adhesive from the flip.
3.
Take off the main lens, paste a liner on the main lens and LCD.
Figure 10. Removing the Main Lens to Expose Housing Screws
4.
Using a T-5 torque driver, remove the 4 flip housing screws. Set the screws aside for
reassembly.
Figure 11. Removing the Flip Housing Screws
April 01, 2008
1 and 2
6809513A81-A