Removing And Replacing The Housing Screws - Motorola U9 Service Manual

Level Service Manual

Removing and Replacing the Housing Screws

G
G
6809513A81-A
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, and SIM as described in the previous procedures.
In addition to 6 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2. Using a T-5 torque driver, remove the 6 screws on the back housing. Be careful not to
damage the back housing. See Figure 4.
Housing Screw
Housing Screw
Figure 4. Removing the Rear Housing Screws
April 01, 2008
Disassembly
Housing Screw
Housing Screw
21