Removing And Replacing The Flip Display Assembly - Motorola V3 Service Manual

Disassembly

Removing and Replacing the Flip Display Assembly

G
36
1. Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, keypad assembly, flip assembly, and flip cover as described in
the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Use the disassembly tool to unseat the flip assembly flex connector from the
display assembly (see Figure 22).
Disassembly tool
Display Assembly
Figure 22. Removing the Flip Assembly Flex Connector
3. Move the flex connector away from the display assembly.
January 31, 2006
V3x
Flip Assembly
flex connector
051247o
6809497A15-A