Removing And Replacing The Display Assembly - Motorola C380 Service Manual

Disassembly

Removing and Replacing the Display Assembly

32
1. Remove the rear housing cover, battery, SIM, endo assembly, keypad assembly,
and camera assembly as described in the procedures.
2. Use the disassembly tool to release the display assembly connector as shown
in Figure 11.
DIsplay Assembly Connector
Figure 11. Removing the Display Assembly Connector
3. Carefully lift the display assembly away from the transceiver board.
4. To replace, align the display assembly with the printed circuit board.
5. Place the display assembly on the transceiver board.
6. Align the display assembly connector to it's socket on the transceiver board.
7. Gently press the display assembly connector into its socket.
8. Replace the front endo housing, endo assembly, SIM, battery, rear housing
cover as described in the procedures.
DIsplay Assembly
May 14, 2004
C380
032461o
6809485A73-O