Disassembly
Removing the Main PCB Assembly
22
1.
Using the flat tip of the disassembly tool, gently & carefully insert in between the keypad
cover and flip knuckle joint as shown below.
2.
Slide the disassembly tool around the outline of the keypad cover to release the keypad
cover from the Xcvr housing .
Figure 5. Removing the Keypad to Access the Xcvr Assembly
3.
After removing the keypad cover with the disassembly tool, carefully raise the PCB
assembly slowly to show access to the main flex connector. Be careful not to tear the flex
cable.
April 01, 2008
1 and 2
6809513A81-A