Table of Contents
Advertisement
Section 2- Initial Set Up
Cable Connections
To make measurements with the instrument, connect the USB cable to instrument and the PC, plug in the 12V power supply and
connect to the power input at the back of the instrument.
®
Note: The power supply can remain plugged into the NanoDrop
ND-1000 Spectrophotometer while the instrument is not in use. When
the unit is in this "standby" mode, power consumption is ~1.5 W and the flashlamp is not energized. Also, the instrument does not
utilize a power switch or give a visual indication of the operability of the 12V power supply.
Registering Your Instrument
Please register your product! We periodically update our software and add new features free of charge. We would like to keep our user
list updated so that we may alert you to these updates. All information supplied to NanoDrop Technologies is completely confidential.
You can register at www.nanodrop.com.
2-2
Advertisement
Table of Contents
