Table of Contents
Advertisement
Instrument panel
(Dashboard)
Instrument panel
1) DISPLAY
2) NEUTRAL LIGHT N (GREEN)
3) GENERIC ERROR WARNING LIGHT
YELLOW)
4) HIGH BEAM LIGHT
5) FUEL WARNING LIGHT
6) TURN INDICATOR LIGHTS
7) ENGINE OIL PRESSURE LIGHT
Important
If the ENGINE OIL light stays ON, stop the
engine or it may suffer severe damage.
8) DTC/DWC STATUS LIGHT (AMBER YELLOW)
-
Light off: DTC/DWC enabled and functioning;
20
(AMBER
(BLUE)
(AMBER YELLOW)
(GREEN)
(RED)
-
Light ON flashing: DTC/DWC enabled, but with
degraded performance;
-
Light steady ON: DTC/DWC disabled and/or not
functioning due to a fault in the control unit.
9) ENGINE DIAGNOSIS - MIL LIGHT
YELLOW)
-
The warning light turns steady on in case of error
in engine management. Proceed slowly, avoid
harsh acceleration and overtaking, take the
vehicle to a Ducati authorised service centre to
eliminate the malfunction.
-
The warning light turns on flashing to warn
about a critical emission-related error that could
damage the catalytic converter. If possible, have
the vehicle be taken to a Ducati authorised
service centre and the malfunction eliminated
and at any rate proceed slowly, avoid harsh
acceleration and overtaking.
10) ABS LIGHT
(AMBER YELLOW)
-
Light off: ABS enabled and functioning;
-
Light ON flashing: ABS in self-diagnosis and/or
functioning with degraded performance;
-
Light steady ON: ABS disabled and/or not
functioning due to a fault in the ABS control
unit.
(AMBER
Advertisement
Table of Contents
