Table of Contents
Advertisement
Front brake lever
2
Pull in the lever (1) towards the handgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The brake lever (1) has a dial (2) for adjusting the
distance between lever and handgrip on the
handlebar.
The lever distance can be adjusted through 10 clicks
of the dial (2).
Turn clockwise to increase lever distance from the
twistgrip. Turn the adjuster anticlockwise to
1
decrease lever distance.
Fig 119
When high pressure is applied to the front brake
lever and the conditions for the VHC system
activations are fulfilled, the Vehicle Hold Control
(VHC) is activated as described in paragraph page
301.
132
Downloaded from
ManualsNet.com
search engine
Advertisement
Table of Contents
