Special Tools; 1/4 Aa - Dodge dakota 2002 Service Manual

DR
FRONT - LINK/COIL (Continued)
DESCRIPTION
Stabilizer Link
Stabilizer Bar Nut
Hub/Bearing
Bolts
Axle Nut
Tie Rod End
Nut
NOTE: Suspension components with rubber/ure-
thane bushings should be tightened with the vehi-
cle at normal ride height. It is important to have the
springs supporting the weight of the vehicle when
the fasteners are torqued. If springs are not at their
normal ride position, vehicle ride comfort could be
affected and premature bushing wear may occur.

SPECIAL TOOLS

9 1/4 AA

Puller C-3894–A
Remover, Wheel Stud C-4150A
BALL JOINT PRESS - C-4212F
N·m
38
202
179 Beginning Torque, Then
Rotate 5 to 10 Times With a
Final Torque of 356
75
Ft. Lbs.
27
149
132 Beginning Torque, Then
Rotate 5 to 10 Times With a
Final Torque of 263
55
REMOVER / INSTALLER BALLJOINT - 8445
RECEIVER CUP - 6761
BALLJOINT RECIEVER/INSTALLER KIT- 8975
FRONT - LINK/COIL
In. Lbs.
—
—
—
—
2 - 29