Description; Specifications; Specifications - Torque - Ignition - Dodge dakota 2002 Service Manual

DR
IGNITION CONTROL (Continued)
• Also to be considered part of the ignition system
are certain inputs from the Crankshaft Position, Cam-
shaft Position, Throttle Position and MAP Sensors
8.0L V-10 ENGINE
. The 8.0L V-10 engine is equipped with 2 remote
coil packs. Conventional spark plug cables are used
with the 8.0L engine. The 8.0L engine will not use a
conventional distributor
The ignition coils are individually fired, but each
coil is a dual output. Refer to Ignition Coil for addi-
tional information.

SPECIFICATIONS

SPECIFICATIONS - TORQUE - IGNITION

DESCRIPTION

Camshaft Position Sensor - 3.7L V-6 Engine
Camshaft Position Sensor - 4.7L V-8 Engine
Camshaft Position Sensor - 5.7L V-8 Engine
Camshaft Position Sensor - 8.0L V-10 Engine
Crankshaft Position Sensor - 3.7L V-6 Engine
Crankshaft Position Sensor - 4.7L V-8 Engine
Crankshaft Position Sensor - 5.7L V-8 Engine
Crankshaft Position Sensor - 5.9L V-8 Engine
Crankshaft Position Sensor - 8.0L V-10 Engine
Distributor Hold Down Bolt - 5.9L V-8 Engine
Ignition Coil Mounting - 5.9L V-8 Engine
(if tapped bolts are used)
Ignition Coil Mounting - 5.9L V-8 Engine
(if nuts/bolts are used)
Ignition Coil Mounting - 3.7L V-6 Engine
Ignition Coil Mounting - 4.7L V-8 Engine
Ignition Coil Mounting - 5.7L V-8 Engine
Ignition Coil Mounting - 8.0L V-10 Engine
* Knock Sensor - 3.7L V-6 Engine
* Knock Sensor - 4.7L V-8 Engine
* Knock Sensor - 5.7L V-8 Engine
Spark Plugs - 3.7L V-6 Engine
Spark Plugs - 4.7L V-8 Engine
** Spark Plugs - 5.7L V-8 Engine
Spark Plugs - 5.9L V-8 Engine
Spark Plugs - 8.0L V-10 Engine
* Do not apply any sealant, thread-locker or adhesive
to bolts. Poor sensor performance may result.
** Torque critical tapered design. Do not exceed 15 ft.
lbs.
Knock sensors are not used with the 8.0L engine.
The ignition system consists of:
• 10 Spark Plugs
• 2 Ignition Coil packs containing 10 individual
coils
• 10 Secondary Ignition Cables
• Powertrain Control Module (PCM)
• Also to be considered part of the ignition system
are certain inputs from the Crankshaft Position,
Camshaft Position, Throttle Position and MAP Sen-
sors
N·m Ft. Lbs.
12
12
12
6
28
28
12
8
8
23
5
11
8
8
12
10
20
20
20
27
27
18 (± 3) 13 (± 2)
41
41
IGNITION CONTROL
In. Lbs.
- 106
- 106
9 105
- 50
21 205
21 205
9 105
- 70
- 70
17 -
- 50
- 100
- 70
- 70
9 105 (± 20)
- 90
15 176
15 176
15 176
20 -
20 -
-
30 -
30 -
8I - 3