Dodge dakota 2002 Service Manual page 604

DR
RESTRAINTS (Continued)
1 - AIRBAG CONTROL MODULE
2 - PASSENGER AIRBAG
3 - PASSENGER AIRBAG ON/OFF SWITCH (STD CAB ONLY)
4 - DRIVER AIRBAG
ment cluster for about six seconds as a bulb test each
time the ignition switch is turned to the On position.
A pyrotechnic-type seat belt tensioner is integral to
the front outboard seat belt retractors mounted on
each lower B-pillar of all models equipped with dual
front airbags.
• Side Curtain Airbags - Optional side curtain
airbags are available for this model when it is also
equipped with dual front airbags. This airbag system
is a passive, inflatable, Supplemental Restraint Sys-
tem (SRS) and vehicles with this equipment can be
readily identified by a molded identification trim but-
Fig. 1 Supplemental Restraint System
5 - SIDE CURTAIN AIRBAG
6 - SIDE IMPACT AIRBAG CONTROL MODULE
7 - SEAT BELT TENSIONER
ton with the "SRS - AIRBAG" logo located on the
headliner above each B-pillar (Fig. 2).
following major components, which are described in
further detail elsewhere in this service information:
Module (ACM) is located on a mount on the floor
panel transmission tunnel, below the center of the
instrument panel.
gral to the ElectroMechanical Instrument Cluster
(EMIC), which is located on the instrument panel in
front of the driver.
The supplemental restraint system includes the
• Airbag Control Module - The Airbag Control
• Airbag Indicator - The airbag indicator is inte-
RESTRAINTS 8O - 3