Dodge dakota 2002 Service Manual page 140

DR
PINION GEAR/RING GEAR (Continued)
(2) Install rear pinion bearing cup (Fig. 48) with
Installer 8886 and Handle C-4171, if bearing is
replaced.
Fig. 48 REAR PINION BEARING CUP
1 - INSTALLER
2 - HANDLE
(3) Install pinion depth shim (Fig. 49) on the pin-
ion gear shaft.
Fig. 49 PINION DEPTH SHIM
1 - PINION DEPTH SHIM
2 - PINION GEAR
FRONT AXLE - 9 1/4 AA
(4) Install rear pinion bearing (Fig. 50) with
Installer C-3095-A and a press.
Fig. 50 REAR PINION BEARING
1 - PRESS
2 - INSTALLER
3 - PINION GEAR
4 - REAR PINION BEARING
(5) Install new collapsible spacer (Fig. 51).
Fig. 51 COLAPSIBLE SPACER
1 - COLAPSIBLE SPACER
2 - PINION GEAR
3 - REAR PINION BEARING
(6) Lubricate pinion and bearings.
3 - 67