Dodge dakota 2002 Service Manual page 664

DR
CABLE (Continued)
Fig. 4 SPEED CONTROL CABLE AT BRACKET - 3.7L
1 - THROTTLE CABLE BRACKET
2 - PLASTIC CABLE MOUNT
3 - SPEED CONTROL CABLE
1 - THROTTLE CABLE
2 - THROTTLE VALVE CABLE
3 - SPEED CONTROL SERVO CABLE
/ 4.7L
Fig. 6 SERVO CABLE AT THROTTLE BODY — 8.0L V-10 ENGINE
Fig. 5 SERVO CABLE AT THROTTLE BODY - 5.9L
1 - VEHICLE SPEED CONTROL CABLE
8.0L Gas
(1) Disconnect negative battery cable at battery.
(2) Using finger pressure only, remove speed con-
trol cable connector at bellcrank by pushing connec-
tor off the bellcrank pin (Fig. 6). DO NOT try to
pull connector off
bellcrank pin. Connector will be broken.
(3) Squeeze 2 tabs on sides of speed control cable
at throttle body mounting bracket (locking plate) and
push out of bracket.
SPEED CONTROL
GAS
perpendicular to
8P - 5
the