Energy Saver Mode; Entering Energy Saver Mode; Leaving Energy Saver Mode - Gestetner G056 Service Manual

6.5.8 ENERGY SAVER MODE

When the machine is not being used, the energy saver feature reduces power
consumption by switching off the fusing lamp.

Entering Energy Saver Mode

Energy saver mode starts after the machine has been idle for a certain time. This
time is specified by the user; the following choices are available (press the Menu
key on the operation panel, and access the System menu).
• Off (energy saver mode never activates)
• 5 minutes
• 15 minutes
• 30 minutes (default)
• 60 minutes
When the machine is in energy saver mode, the CPU turns off the fusing lamp.
However, the +24V, +12V, and +5V lines are still active.

Leaving Energy Saver Mode

The machine leaves energy saver mode when one of the following happens.
• Print command received from the PC
• Any cover opened and closed
• Any operation panel keys pressed
SM
IMAGE FUSING AND PAPER EXIT
6-27 G056/G058