Image – Write - Gestetner G056 Service Manual

3.3.3 [IMAGE] – [WRITE]
Field
Source
Target
Card erase
before write
Start Address
Length
Base of Address/
Length
After writing the data to a flash memory card, an 8-bit checksum
you can compare it with the checksum
SM
Source file name that is currently active in the application.
Card slot number that has a flash memory card currently installed.
If this is checked, the application erases the whole card before writing
data from the source file.
The default setting is checked (= erase).
A "0 (zero)" appears at default.
Change this setting if necessary.
Hexadecimal length of the source file appears at default.
Do not change the setting.
Do not change the settings.
The default setting is "Hex".
13-9
Description
of the source file.
FUNCTIONS
pops up, so that
G056/G058