Gestetner G056 Service Manual page 237

FIRMWARE HISTORY
⇒
G073/G074 PRINTER CONTROLLER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
The following has been corrected;
PCL
• Euro font does not print correctly.
• Line Spacing Command, "lochEsc&l#D"loch,
causes incorrect output
• Same line widths when BitSW #3-3 is ON in
CAD printing
• Some True Type font might not be bolded.
• Slow Printing from AutoCAD
• When using bold font, lines may be printed on
the blank of page.
PS3
• The printing speed of a PS job slows down
after a PS3 job is reset.
• PS print file is printed as text
• Lines may be printed on the blank of page.
• The printer controller locks-up when printing
from Unix Acrobat.
• Euro symbol is not printed when using PS
driver.
G073/G074
FIRMWARE
LEVEL
4-10
Rev. 12/2002
SERIAL FIRMWARE
NUMBER VERSION
SM