Polycom MGC-25 Release Notes page 54

Hide thumbs Also See for MGC-25:
Table of Contents

Advertisement

MGC Release Notes - Version 9.0
Table 10: System Limitations (Continued)
No.
69.
70.
71.
72.
73.
74.
75.
76.
77.
50
Category
Description
MUX
When four participants of a unit use
FECC and P+C, or FECC and
Siren 7/14, the MUX card can crash.
NTP
When the MCU connects to the NTP
server for a time calibration, and the
time difference is greater than 15
hours, the synchronization to the NTP
will not occur.
On-line Help
On-line help is not updated.
People and
When using Content, the number of
Content V0
supported participants per H.323
network card may decrease as follows:
MG323 board - 10 instead of 12
IP24 board - 20 instead of 24
P+C
When a PVX stops sending content to
VSX7000 or VSX8000 endpoints, a
frozen picture will be displayed on the
VSX endpoint.
IP24
IP24 cards support 7 P+C participants
per unit instead of 8. Allowing eight
P+C participants to participate in a
conference on one unit will result in
video artifacts.
PRR
When the system.cfg, AUDIO PLUS
FLAGS section,
SINGLE_PARTY_HEARS_MUSIC flag
is set to YES, the first participant to join
the conference does not hear the IVR
message "The recording has started".
The party does hear music or silence,
and the PRR will record music or
silence based on the Music sources.
Note: The system behaves similarly
when a conference is set to On Hold
or Wait for Chair.
PSOS
The Backup and Restore processes
take more than 20 minutes to
complete.
PSOS
The starting time of the first reservation
after winter daylight saving time
change, is shifted by one hour.
Workaround/
ID#
Remarks
21622
Do not use FECC
with P+C or Siren,
or configure the
units for two
participants.
20619
Stop and start the
NTP.
15670
Resources should
be manually
allocated to the
additional
participants (11-12
and 21 to 24) using
the IP address of
the appropriate
card.
VNGM
-906
VNGM
-1107
19322
Set the
SINGLE_PARTY_H
EARS_MUSIC flag
to NO.
18869
18754

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGC-25 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Mgc-50Mgc-100

Table of Contents