Polycom MGC-25 Release Notes page 42

MGC Release Notes - Version 9.0
Table 8: Corrections between Versions V.7.5.0 and V.8.0
#.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
38
Category Description
General The MCU occasionally disconnects
from MGC manager when using a
secured port (port 443 - SSL).
General The 'Auto_Redial' parameters in
'confer.cfg' file are not updated.
General Wrong memory allocation, after months
of working in Reservation mode, results
in video freezes and audio loss.
General The MCU got gsegment.cpp,
termsock.cpp asserts & MMGR
exception.
General When you create a Meeting Room with
Entry Queue access and assign a
Numeric ID, change the ID once and
then change back to the original ID
value, the following error message is
generated: "Conference ID occupied".
General When running large conferences (120
participants) after 1.5 hours, the MGC
Manager and API applications
disconnect and the connection to the
MCU is lost. The conferences continue
running for about 20 min. and then the
MCU self-reboots.
General The MCU self-reboots with no activity
on it, NVERCFG.CPP asserts appear.
GW Connecting POTS to H.323 by the
MGC Gateway fails in Version 7.x
XPEK MGC
H.239 In an H.239, P+C conference, ISDN
endpoints cannot reconnect after being
disconnected. An error is displayed:
"End init com not received".
IP The Stack Controller and RTP
processors crash even when no
conferences are running on MCUs with
an IP24 card.
ISDN An H.320 participant connecting to a
conference defined as Pro-Motion
(NTSC) and line rate of 384 Kbps may
connect as Secondary.
ID# Remarks
20880 Reconnect to the
MCU.
20897 Require MCU
restart in order
for changes to
take effect.
21110
21589
21614
21808
22097
21916
21951
21456
10891 Disconnecting
and reconnecting
this participant
can solve the
problem.