Mcu Disk Space Verification - Polycom MGC-25 Release Notes

7.
8.
The default system.cfg file is located in the appropriate MGC SW CD folder. To access a
modified system.cfg file, contact Polycom Support.
9.

MCU Disk Space Verification

In Version 9.0, during MCU software downloading process, the system automatically
verifies the amount of disk space available before the installation begins. It is still possible
to manually verify the available disk space using the IP Terminal.
To verify the disk space on the MCU:
1.
2.
Click the Install button to start the installation procedure.
Install the new system.cfg file.
a. Right-click the MCU icon, select MCU Utils and the click Send File.
The Install File dialog box opens.
b. Click the Browse button to open the Select Source File dialog box and select the
system.cfg file, and then click Open.
The name of the file appears in the Install field in the Install File dialog box.
c. Click Yes to proceed with file downloading to the MCU's hard disk.
The Done dialog box opens.
d. Click OK.
Reset the MCU.
Right-click the MCU icon, and then click IP Terminal.
The Donkey-COM window opens.
In the command line of the Donkey-COM window, type disk_stat and press Enter.
The system displays information about the MCU disk.
In case the number of Available Bytes is lower than 130,000, please contact support
before installing the new version.
Software Upgrade Procedure
15