Table of Contents
Advertisement
6.7.5
Results of Stakeout
Access
REFLINE
Results,
General page
REFLINE
Results,
Coords page
Reference Line
OCUPY (F1), STOP (F1) and then STORE (F1) in REFLINE Stakeout.
Description of fields
Field
<Point ID:>
<Code:>
<Meas Chainage:>
<Meas Offset:>
<Design Ht:>
<Meas Ht:>
Next step
PAGE (F6) changes to the Coords page.
This page displays the design coordinates as well as the differences between design
and measured coordinates.
Next step
PAGE (F6) changes to the Map page.
CONT (F1)
+ELEV (F3)
PAGE (F6)
Option
Description
Output
The point ID of the point staked.
User input
With codelist:
Select a code from the choicelist. Only point
codes are available for selection.
<None> to store a point without code or to
perform Linework without coding.
Without codelist:
Type in a code.
----- to store a point without code or to
perform Linework without coding.
Output
The chainage measured at the staked point.
Output
The offset from the polyline measured at the
staked point.
Output
Allows input of the design height of the target
point. The suggested value for the <Design
Ht:> is as configured in the <Heights:> field
in REFLINE Configuration, Heights page.
Output
The height measured at the staked point.
GPS1200+
To return to REFLINE Stakeout.
To add a vertical offset to the design
height and to display the new height.
To change to another page on this
screen.
111
Advertisement
Table of Contents
